## Determine the elastic curve for the cantilevered W360 x 45 beam using the x coordinate.

Determine the elastic curve for the cantilevered W360 * 45 beam using the x coordinate. Specify the maximum slope and maximum deflection. E = 200 GPa.

Determine the elastic curve for the cantilevered W360 * 45 beam using the x coordinate. Specify the maximum slope and maximum deflection. E = 200 GPa.

The A-36 steel beam has a depth of 250 mm and is subjected to a constant moment M0, which causes the stress at the outer fibers to become Οy = 250 MPa. Determine the radius of curvature of the beam and the beamβs maximum slope… Read More »The A-36 steel beam has a depth of 250 mm and is subjected to a constant moment

If the W360 * 45 wide-flange beam has an allowable normal stress of Ο = 150 MPa and an allowable shear stress of π = 85 MPa, determine the maximum cable force P that can safely be supported by the beam.

The simply supported beam is made of timber that has an allowable bending stress of Ο = 6.72 MPa and an allowable shear stress of π = 0.525 MPa. Determine the dimension b if it is to be rectangular and have a height-to-width ratio of… Read More »The supported beam is made of timber that has an allowable bending stress of Ο = 6.72 MPa

The box beam has an allowable bending stress of Ο = 10 MPa and an allowable shear stress of π =775 kPa. Determine the maximum intensity w of the distributed loading that it can safely support. Also, determine the maximum safe nail spacing for each… Read More »The box beam has an allowable bending stress of Ο = 10 MPa and an allowable shear stress of π =775 kPa

Investigate if the W250 * 58 beam can safely support the loading. The beam has an allowable normal stress of Ο =150 MPa and an allowable shear stress of π = 80 MPa. Assume there is a pin at A and a roller support at… Read More »Investigate if the W250x58 beam can safely support the loading. The beam has an allowable normal stress of Ο =150 MPa

The beam is made of timber that has an allowable bending stress of Ο =6.5 MPa and an allowable shear stress of π= 500 kPa. Determine its dimensions if it is to be rectangular and have a height-to-width ratio of 1.25. Assume the beam rests… Read More »The beam is made of timber that has an allowable bending stress of Ο =6.5 MPa and π= 500 kPa

The state of strain at the point on the leaf of the caster assembly has components of Ex = -400 x 10^-6, Ey = 860 x 10^-6, and Yxy =375 x 10^-6. Use the strain transformation equations to determine the equivalent in-plane strains on an… Read More »The state of strain at the point on the leaf of the caster assembly has components of Ex = -400 x 10^-6, Ey = 860 x 10^-6

A rod has a radius of 10 mm. If it is subjected to an axial load of 15 N such that the axial strain in the rod is Ex= 2.75 x 10^-6 , determine the modulus of elasticity Β and the change in the rodβs diameter… Read More »A rod has a radius of 10 mm. If it is subjected to an axial load of 15 N such that the axial strain in the rod is Ex= 2.75 x 10^-6

A bar of copper alloy is loaded in a tension machine and it is determined that Ex = 940 x 10^-6Β , x = 100 MPa y = 0 z = 0 Determine the modulus of elasticity (Ecu), and the dilatation (ecu), of the copper with… Read More »A bar of copper alloy is loaded in a tension machine and it is determined that Ex = 940 x 10^-6, Determine the modulus of elasticity